StellaOffice – Distributing mobile signal in your office
Series 1002 – Commercial grade repeaters – EU compliant
The StellaOffice is a 4 port commercial grade cellular repeater for providing mobile coverage in large buildings. It has 4 indoor antenna ports which provide coverage for about 5-15 rooms, depending on the size of rooms and wall materials.
This powerful repeater has a simple LED indicator to aid during installation. This repeater is R.E.D compliant and safe on the operator’s network. It also conforms to all E.T.S.I tests.
Frequency options
The StellaOffice repeater comes with different frequency options.
For rural locations 1,2 or 3 of the lower bands is recommended (ie, 700/ 800/ 900/ 1800MHz). For urban environments, all 5 bands is recommended.
All services are covered: GSM, 3G, 4G, 5G but please check your specific country and operator.
Coverage
The StellaOffice repeater kit contains 4 antennas. Each antenna provides 30X30 m2 of coverage in open space. This provides coverage in 4 separate areas within the building.
However, this is only in open space. In practice, it equates to about 5-15 sized rooms in a typical building layout. The coverage depends on the type of walls inside the building.
Concrete or metal insulated walls will reduce the coverage, whereas plaster board walls and wide open internal spaces allow an increase in coverage.
Expand coverage with LineAmps:
You can connect LineAmps up to 100m after the StellaOffice repeater. LineAmps boost the signal another 20dB and this allows the signal to be propagated deep into the building. Typically four LineAmps are installed after the repeater is a star configuration. However this can be increased to eight LineAmps or more with the use of splitters. See diagram below.
Lineamps must never be daisy chained one after the other.
The diagram below illustrates recommended cable lengths for when splitters are used and not used. Please contact us to find out more about this modular system.
StellaOffice – Distributing mobile signal in your office
Series 1002 – Commercial grade repeaters – EU compliant
The StellaOffice is a 4 port commercial grade cellular repeater for providing mobile coverage in large buildings. It has 4 indoor antenna ports which provide coverage for about 5-15 rooms, depending on the size of rooms and wall materials.
This powerful repeater has a simple LED indicator to aid during installation. This repeater is R.E.D compliant and safe on the operator’s network. It also conforms to all E.T.S.I tests.
Frequency options
The StellaOffice repeater comes with different frequency options.
For rural locations 1,2 or 3 of the lower bands is recommended (ie, 700/ 800/ 900/ 1800MHz). For urban environments, all 5 bands is recommended.
All services are covered: GSM, 3G, 4G, 5G but please check your specific country and operator.
Coverage
The StellaOffice repeater kit contains 4 antennas. Each antenna provides 30X30 m2 of coverage in open space. This provides coverage in 4 separate areas within the building.
However, this is only in open space. In practice, it equates to about 5-15 sized rooms in a typical building layout. The coverage depends on the type of walls inside the building.
Concrete or metal insulated walls will reduce the coverage, whereas plaster board walls and wide open internal spaces allow an increase in coverage.
Expand coverage with LineAmps:
You can connect LineAmps up to 100m after the StellaOffice repeater. LineAmps boost the signal another 20dB and this allows the signal to be propagated deep into the building. Typically four LineAmps are installed after the repeater is a star configuration. However this can be increased to eight LineAmps or more with the use of splitters. See diagram below.
Lineamps must never be daisy chained one after the other.
The diagram below illustrates recommended cable lengths for when splitters are used and not used. Please contact us to find out more about this modular system.