Choose Your Language:  🇫🇷  🇪🇸  🇮🇹

StellaHome Family

Boosts mobile signal in 2-5 rooms

StellaHome Family

Frequency MHzBandFrequency MHzPrice exc VAT
SD-RP1002-LGDWHB20/ B8/ B3/ B1/ B7800/ 900/ 1800/ 2100/ 2600 €1363
SD-RP1002-LGWB20/ B8/ B1800/900/2100 €810
SD-RP1002-GDWB8/ B3/ B1900/1800/2100€810
SD-RP1002-LGB20/B8800 /  900 €598 
SD-RP1002-GWB8/ B1900/ 2100 €598
SD-RP1002-GDB8/ B3900/ 1800€598 
SD-RP1002-LB20 800 €387
SD-RP1003-GB8900€387
SD-RP1002-DB31800€387
SD-RP1002-WB12100€387
SD-RP1002-HB72600€387
  • Included in the price- 1 outdoor antenna/1 indoor antenna/ 12m outdoor cable/ repeater + power supply.
  • More bands deliver increased bandwidth, faster data speed.
  • Benefit from better coverage with the lower frequency whilst better data speeds with the higher frequency.
  • Coverage: 2-5 rooms
  • Designed, manufactured and tested in Ireland, EU.
  • Supports all operators.
  • Supports unlimited numbers of users.
  • Guaranteed Irish/ CE approved/ Comreg approved.

 

Series 1002 – Professional grade repeaters – EU compliant

  1. The antenna on the roof receives mobile signal from all networks, and sends it down the cable to the StellaHome repeater.
  2. The StellaHome repeater amplifies the signal and sends it around the house.
  3. All mobile devices can now communicate with this enhanced signal.

 

Frequencies

There are several frequency options for the StellaHome repeater. Choose to boost just one frequency like 900MHz for voice calls,  or all 5 mobile frequencies, enabling 2G, 3G ,4G and 5G. The more frequencies added, the better the coverage and higher the data speeds.

 

Coverage

The StellaHome repeater kit contains 1 internal antenna. This antenna provides 30M2 X 30M2 of coverage in open space.

However, this is only in open space. In practice,  it  equates to about 2-5 sized rooms in a typical building layout. The coverage depends on the type of walls inside the building.

Concrete or metal insulated walls will reduce the coverage, whereas plaster board walls and  wide open internal spaces allow an increase in coverage.

See building A and building B above.

All the walls are concrete block and the doors are wooden.

Building A:  In this building , we can get away with using only one antenna. The signal will pass through the  doors to the three smaller rooms.

Building B:  This building  has a corridor separating the rooms. To achieve maximum coverage with only one antenna, we place the antenna in the corridor as shown. Notice the reduction of signal in all the rooms. Interior concrete block walls reduce coverage significantly.   If more  reliable  coverage is required  in the rooms, more antennas will be necessary. We recommend an iRepeater in this case.

 

A Closer Look

Installation

 

A  “loose” installation is recommended to begin with.

  1. Install the outdoor panel antenna in a location where there is good mobile signal. (usually this is on the roof).
  2. Using the supplied 12m cable, run it down inside the house to the StellaHome repeater.
  3. Attach this cable to the repeater. Then attach the indoor panel antenna to the repeater.
  4. Plug in the power supply. 

*All kits in the StellaHome family are supplied with an exterior panel antenna, except the Stellahome 5 band, which uses an exterior Yagi antenna.

 

Series 1002 – Professional grade repeaters – EU compliant

  1. The antenna on the roof receives mobile signal from all networks, and sends it down the cable to the StellaHome repeater.
  2. The StellaHome repeater amplifies the signal and sends it around the house.
  3. All mobile devices can now communicate with this enhanced signal.

 

Frequencies

There are several frequency options for the StellaHome repeater. Choose to boost just one frequency like 900MHz for voice calls,  or all 5 mobile frequencies, enabling 2G, 3G ,4G and 5G. The more frequencies added, the better the coverage and higher the data speeds.

 

Coverage

The StellaHome repeater kit contains 1 internal antenna. This antenna provides 30M2 X 30M2 of coverage in open space.

However, this is only in open space. In practice,  it  equates to about 2-5 sized rooms in a typical building layout. The coverage depends on the type of walls inside the building.

Concrete or metal insulated walls will reduce the coverage, whereas plaster board walls and  wide open internal spaces allow an increase in coverage.

See building A and building B above.

All the walls are concrete block and the doors are wooden.

Building A:  In this building , we can get away with using only one antenna. The signal will pass through the  doors to the three smaller rooms.

Building B:  This building  has a corridor separating the rooms. To achieve maximum coverage with only one antenna, we place the antenna in the corridor as shown. Notice the reduction of signal in all the rooms. Interior concrete block walls reduce coverage significantly.   If more  reliable  coverage is required  in the rooms, more antennas will be necessary. We recommend an iRepeater in this case.

 

A Closer Look

Installation

 

A  “loose” installation is recommended to begin with.

  1. Install the outdoor panel antenna in a location where there is good mobile signal. (usually this is on the roof).
  2. Using the supplied 12m cable, run it down inside the house to the StellaHome repeater.
  3. Attach this cable to the repeater. Then attach the indoor panel antenna to the repeater.
  4. Plug in the power supply. 

*All kits in the StellaHome family are supplied with an exterior panel antenna, except the Stellahome 5 band, which uses an exterior Yagi antenna.