The antenna on the roof picks up signal from all networks, and sends it down the cable to the R4 repeater. The R4 amplifies this signal and sends it around the home. All mobile devices in this room can now communicate with this enhanced signal.
The R4 repeater provides more control. Switch on/off or attenuate any band. This is useful for when close to a mobile tower and a reduction in signal strength is required. Sometimes switching off a particular band can beneficial as it forces the data over the other bands which can be faster.
Frequency
The R4 repeater boosts four frequency bands.
B20 (800MHz): Suitable for rural locations, and when the phone is is weak signal areas.
B8 (900MHz) : Great for voice calls.
B3 (1800MHz): Fast data speeds in urban locations.
B1 (2100MHz) : Fast data speeds in urban locations.
Having four frequencies allows for carrier aggregation which means 2 or more bands can be combined to offer much greater data speeds.
The kit is very easy to install and requires no further attention once plugged in. It seamlessly amplifies mobile signal from outside the building and sends it around inside the building.
Touch Control
A: Main screen. View the signal strength per band displayed with green signal bars. The blue icon lights up when there is a call or data session in progress.
B: Decibel screen: Here you can see detailed values of all the parameters in Decibels.
C: See which bands are most frequently used. Switch on or off any band.
D: Attenuate individual bands up to 18dBs.
Coverage
The coverage of the R4 repeater is 800m2 in open space. In practice, this equates to about 4 large sized rooms in a typical house.
Note:
The stronger the signal strength outside the house, the greater the indoor coverage.
The larger and more open the interior space, the greater the indoor coverage. (Concrete walls block signal.)
The antenna on the roof picks up signal from all networks, and sends it down the cable to the R4 repeater. The R4 amplifies this signal and sends it around the home. All mobile devices in this room can now communicate with this enhanced signal.
The R4 repeater provides more control. Switch on/off or attenuate any band. This is useful for when close to a mobile tower and a reduction in signal strength is required. Sometimes switching off a particular band can beneficial as it forces the data over the other bands which can be faster.
Frequency
The R4 repeater boosts four frequency bands.
B20 (800MHz): Suitable for rural locations, and when the phone is is weak signal areas.
B8 (900MHz) : Great for voice calls.
B3 (1800MHz): Fast data speeds in urban locations.
B1 (2100MHz) : Fast data speeds in urban locations.
Having four frequencies allows for carrier aggregation which means 2 or more bands can be combined to offer much greater data speeds.
The kit is very easy to install and requires no further attention once plugged in. It seamlessly amplifies mobile signal from outside the building and sends it around inside the building.
Touch Control
A: Main screen. View the signal strength per band displayed with green signal bars. The blue icon lights up when there is a call or data session in progress.
B: Decibel screen: Here you can see detailed values of all the parameters in Decibels.
C: See which bands are most frequently used. Switch on or off any band.
D: Attenuate individual bands up to 18dBs.
Coverage
The coverage of the R4 repeater is 800m2 in open space. In practice, this equates to about 4 large sized rooms in a typical house.
Note:
The stronger the signal strength outside the house, the greater the indoor coverage.
The larger and more open the interior space, the greater the indoor coverage. (Concrete walls block signal.)