Choose Your Language:  🇫🇷  🇪🇸  🇮🇹

R4 Repeater Kit – with LCD

Boosts mobile signal in 2-5 rooms

R4 Repeater Kit – with LCD

SKU Product CodeFrequency MHzBandPrice 
SD-RP1002-LGDW 800/ 900/ 1800/ 2100B20/ B8/ B3/ B1869€
  • Included in the price is 1 outdoor antenna/1 indoor antenna/ 12m outdoor cable/ repeater + power supply.
  • LCD touchscreen. Turn OFF/ON bands/ Add attenuation to any band.
  • Increased bandwidth, Faster data speeds than 3 band, 2 band and 1 band.
  • Benefit from better coverage with the lower frequency whilst better data speeds with the higher frequency.
  • Coverage: 2-5 rooms.
  • Designed, manufactured and tested in Ireland, EU.
  • Supports all operators.
  • Supports unlimited numbers of users.
  • Guaranteed Irish/ CE approved/ Comreg approved.

Overview

The antenna on the roof picks up signal from all networks, and sends it down the cable to the R4 repeater. The R4 amplifies this signal and sends it around the home. All mobile devices in this room can now communicate with this enhanced signal.

The R4 repeater provides more control. Switch on/off or attenuate any band. This is useful for when close to a mobile tower and a reduction in signal strength is required.

 

Frequency

The R4 repeater boosts four frequency bands.

  • B20 (800MHz) suitable  for rural locations and fast 4G speeds.
  • B8 (900MHz) : This option is great for voice calls in rural locations.
  • B3 (1800MHz): This band is great for 4G data speeds in urban locations.
  • B1 (2100MHz) : This option is great for fast 3G/4G and sometimes 5G data speeds, in urban locations.

 

 Carrier aggregation means 2 or more bands can be combined to offer much greater data speeds.

The kit is very easy to install and requires no further attention once plugged in. It seamlessly amplifies mobile signal from outside the building and sends it around inside the building.

 

Touch Control

A: Main screen. View the signal strength per band displayed with green signal bars. The blue icon lights up when there is a call or data session in progress.

B: Decibel screen: Here you can see detailed values of all the parameters in Decibels.

C: See which bands are most frequently used. Switch on or off any band.

D: Attenuate individual bands up to 18dBs.

 

Coverage

The coverage of the R4 repeater is 800m2 in open space. In practice, this equates to about 4 large sized rooms in a typical house.

Note:

  1. The stronger the  signal strength outside the house, the greater the indoor coverage.
  2. The larger and more open the interior space, the greater the indoor coverage. (Concrete walls block signal.)

 

 

Installation

 

A “loose” installation is recommended to begin with. This will allow for testing the system before securing everything into place.

  1. Install the outdoor panel antenna in a location where there is good mobile signal. (usually this is on the roof).
  2. Using the supplied 12m cable, run it down inside the house to the R4 repeater.
  3. Attach this cable to the repeater.
  4. Plug in the power supply.

Overview

The antenna on the roof picks up signal from all networks, and sends it down the cable to the R4 repeater. The R4 amplifies this signal and sends it around the home. All mobile devices in this room can now communicate with this enhanced signal.

The R4 repeater provides more control. Switch on/off or attenuate any band. This is useful for when close to a mobile tower and a reduction in signal strength is required.

 

Frequency

The R4 repeater boosts four frequency bands.

  • B20 (800MHz) suitable  for rural locations and fast 4G speeds.
  • B8 (900MHz) : This option is great for voice calls in rural locations.
  • B3 (1800MHz): This band is great for 4G data speeds in urban locations.
  • B1 (2100MHz) : This option is great for fast 3G/4G and sometimes 5G data speeds, in urban locations.

 

 Carrier aggregation means 2 or more bands can be combined to offer much greater data speeds.

The kit is very easy to install and requires no further attention once plugged in. It seamlessly amplifies mobile signal from outside the building and sends it around inside the building.

 

Touch Control

A: Main screen. View the signal strength per band displayed with green signal bars. The blue icon lights up when there is a call or data session in progress.

B: Decibel screen: Here you can see detailed values of all the parameters in Decibels.

C: See which bands are most frequently used. Switch on or off any band.

D: Attenuate individual bands up to 18dBs.

 

Coverage

The coverage of the R4 repeater is 800m2 in open space. In practice, this equates to about 4 large sized rooms in a typical house.

Note:

  1. The stronger the  signal strength outside the house, the greater the indoor coverage.
  2. The larger and more open the interior space, the greater the indoor coverage. (Concrete walls block signal.)

 

 

Installation

 

A “loose” installation is recommended to begin with. This will allow for testing the system before securing everything into place.

  1. Install the outdoor panel antenna in a location where there is good mobile signal. (usually this is on the roof).
  2. Using the supplied 12m cable, run it down inside the house to the R4 repeater.
  3. Attach this cable to the repeater.
  4. Plug in the power supply.