Repeaters alone bring mobile signal about 50m into a building. For larger buildings where further distances are required, LineAmps can be installed. LineAmps add 20dB extra gain to the signal and this allows for an extra 100m of cabling into the building. This solution is suitable for larger buildings with multiple floors and extensive areas. (LineAmps are not available for UK or Ireland. However, multiple iRepeaters can be used instead)
All devices are connected to the StellaControl platform where they can be remotely monitored and configured.
Remote Monitoring
With Remote Monitoring, all iRepeaters can be managed and monitored remotely. Stella and /or the installer will monitor the performance of the system over time, and take corrective action in the case of any issues.
LITE monitoring is free for the first year.
Warranty
Full 3 year warranty as standard. Up to 4 year extended warrantly available.
HDR manual attenuators
The iRepeaters have new High Dynamic Range (HDR) manual attenuators built into them, accessible via the LCD panel and StellaControl. This removes the need to install physical external attenuators to control high powered signals, making the installation much simpler.
Feedback detection
The new algorithm can now accurately detect when feedback occurs. This typically happens when the outdoor and indoor antenna are installed too close together.
Increasing coverage beyond 4 ports
See distance rules for splitters below.
Design services and Dedicated Stella Engineer
Use the free StellaPlanner tool to help you design repeater systems for larger buildings. Stella Doradus now offer a dedicated engineer to help and advise you before, during and after the installation. Please inquire about this free service.
Repeaters alone bring mobile signal about 50m into a building. For larger buildings where further distances are required, LineAmps can be installed. LineAmps add 20dB extra gain to the signal and this allows for an extra 100m of cabling into the building. This solution is suitable for larger buildings with multiple floors and extensive areas. (LineAmps are not available for UK or Ireland. However, multiple iRepeaters can be used instead)
All devices are connected to the StellaControl platform where they can be remotely monitored and configured.
Remote Monitoring
With Remote Monitoring, all iRepeaters can be managed and monitored remotely. Stella and /or the installer will monitor the performance of the system over time, and take corrective action in the case of any issues.
LITE monitoring is free for the first year.
Warranty
Full 3 year warranty as standard. Up to 4 year extended warrantly available.
HDR manual attenuators
The iRepeaters have new High Dynamic Range (HDR) manual attenuators built into them, accessible via the LCD panel and StellaControl. This removes the need to install physical external attenuators to control high powered signals, making the installation much simpler.
Feedback detection
The new algorithm can now accurately detect when feedback occurs. This typically happens when the outdoor and indoor antenna are installed too close together.
Increasing coverage beyond 4 ports
See distance rules for splitters below.
Design services and Dedicated Stella Engineer
Use the free StellaPlanner tool to help you design repeater systems for larger buildings. Stella Doradus now offer a dedicated engineer to help and advise you before, during and after the installation. Please inquire about this free service.