Choose Your Language:

Search

PreAmp

Boost signal over long cable run.

PreAmp

The Preamp should be used when there is a large distance between the donor antenna and the repeater.

SKUFrequency MHzBand
SD-PA-LGDWH800/900/1800/2100/2600B20/ B8/ B3/ B1/ B7 
SD-PA -GDW900/1800/2100B8/ B3/ B1
SD-PA-LG800/900B20/ B8
  • Adds pre-amplification to the mobile signal so that it can traverse 100m of cable, and arrive at the repeater with full signal.
  • Supports all operators.
  • Supports unlimited numbers of users.
  • LED Diagnostic indicator for signal levels. 
  • More bands deliver increased bandwidth and faster data speed.
  • Designed, manufactured and tested in Ireland, EU.

How It Works

PreAmp – Boosting mobile signal over long cable runs.

The mobile signal from all operators is received by the outdoor antenna and sent to the PreAmp unit. The PreAmp can be installed just below the antenna in a weatherproof box. The PreAmp boosts the signal to “prepare” it for the long cable run* of up to 100 meters in length. In the area where you need coverage, install any standard repeater and attach the 100m cable to it.

The PreAmp is designed for situations where there is a long run of cable from outside to inside the building. Up to 100 meters of (SD400)  cable is allowed between the external antenna and the repeater without signal loss. This is very good for very large building installations, but also for areas in the countryside where the location where there is a good signal is far away from the area where signal is required.

*Specified for SD400 cable.

PreAmp – Boosting mobile signal over long cable runs.

The mobile signal from all operators is received by the outdoor antenna and sent to the PreAmp unit. The PreAmp can be installed just below the antenna in a weatherproof box. The PreAmp boosts the signal to “prepare” it for the long cable run* of up to 100 meters in length. In the area where you need coverage, install any standard repeater and attach the 100m cable to it.

The PreAmp is designed for situations where there is a long run of cable from outside to inside the building. Up to 100 meters of (SD400)  cable is allowed between the external antenna and the repeater without signal loss. This is very good for very large building installations, but also for areas in the countryside where the location where there is a good signal is far away from the area where signal is required.

*Specified for SD400 cable.